---
title: "How to prepare a 3D model for printing: files, units and the checks that matter"
url: https://roboticgen3d.com/learn/prepare-3d-model-for-printing
updated: 2026-10-30
---

Your model 6 min readUpdated 30 October 2026

# How to prepare a 3D model for printing: files, units and the checks that matter

Which file to send (STL, OBJ, 3MF or STEP), why units and closed meshes matter, and the checks to make before you ask for a 3D printing quote.

1. Which file to send
2. Export resolution
3. A closed mesh
4. Units and size
5. Check before you send
6. Questions

A good print starts with a good file. Three things decide whether a model is ready: the file you export, the units it is in, and whether its surface is closed.

In 30 seconds

- **Send STL, OBJ, 3MF or STEP.** STEP keeps exact curves; 3MF keeps its units.
- **Export with enough triangles** for curves to look round, and no more than you need.
- **Close the surface.** A printer needs to know what is inside the part.
- **Check the units and size.** Each piece must fit 256 × 256 × 256 mm.

## Which file to send

Our quote page reads four formats. They all describe the same thing, the shape of your part, but they keep different details about it.

| Format | What it carries | Usually comes from |
| --- | --- | --- |
| STL | The surface as triangles. No units. | Almost every CAD and modelling program |
| OBJ | The surface as triangles (and often colour). No units. | Modelling and 3D-scanning apps |
| 3MF | Triangles with their units, in one tidy package. | Newer CAD programs and slicers |
| STEP | Exact CAD surfaces: true curves, not triangles. | Engineering CAD (Fusion, SolidWorks, Onshape, FreeCAD) |

If you designed the part in engineering CAD, **STEP** is the cleanest choice: it holds the true curves. If you only have a mesh, send **3MF** where you can, then STL or OBJ.

## Export resolution

STL, OBJ and 3MF describe a curve as many small flat triangles. Export too few and you can see the flats on every round edge; export far too many and the file grows without the part looking any different. Most programs call this the resolution, tolerance or quality of the export.

**Low:** Flat faces show on every curve.

Aim for curves that look round when you zoom in on your screen. A STEP file avoids the question entirely, because it keeps the exact curve.

## A closed mesh

A slicer cuts your model into layers and fills in each one. To do that, it has to know which side of the surface is inside the part. If the surface has a gap, even a tiny one, there is no inside to fill.

A gap in the surface: the slicer cannot tell inside from outside, and layers come out wrong or missing.

Models exported as solids from CAD are usually closed already. Models from sculpting apps, games or 3D scans are where gaps and loose faces tend to hide; most modelling programs have a repair or “make solid” command for them. Our quote page measures the model’s volume and shows an estimated price once it can read a closed shape.

## Units and size

STL and OBJ files store numbers, not units. A part drawn as 120 × 80 × 40 could be 120 millimetres long or 120 inches long, and the file cannot say which. When you upload one, choose millimetres, centimetres or inches.

The file says 120 × 80 × 40. Read as millimetres, that is 120 × 80 × 40 mm: **it fits the 256 mm build area.**

Each piece has to fit inside the 256 × 256 × 256 mm build area of our Bambu Lab P2S printers. If your part is larger, message us on WhatsApp before you order.

## Check before you send

When you add a file on the quote page, you see the model in 3D and the numbers it is made of: its dimensions, geometric volume, surface area, triangle count and file size. Before you send the request, check that:

- the dimensions are the size you expect, in the units you chose;
- the model looks whole, with no missing faces or stray pieces;
- each piece fits inside 256 × 256 × 256 mm;
- the settings suit the job ([what each setting does](https://roboticgen3d.com/learn/layer-height-infill-material)).

Your file is ready

Upload it, check it in 3D, choose your settings and ask for a free quote.

[Upload your model](https://roboticgen3d.com/quote)

Not sure what it will cost? [What decides the price of a 3D print](https://roboticgen3d.com/learn/3d-printing-cost-sri-lanka) explains each part of the estimate. No model at all? [We can design it](https://roboticgen3d.com/learn/idea-to-3d-design).

## Questions

### Which files can I upload, and how big?

STL, OBJ, 3MF and STEP, up to 20 MB each and 100 MB per request. STL and OBJ files have no unit, so choose millimetres, centimetres or inches when you upload them.

### Can I send several models at once?

Yes. Add several model files, choose settings for each one and set a separate quantity for each. They go together in the same quotation request.

### What if my part is bigger than the printer?

Each piece has to fit inside the 256 x 256 x 256 mm build area of our Bambu Lab P2S printers. If your part is larger, message us on WhatsApp before you order.

### I do not have a 3D model. What now?

Request a 3D design instead: describe the part, give its rough size and add sketches or photos. We design it and confirm on WhatsApp before anything is printed.

## More guides

- [Getting started 5 minShop, upload or design: which route fits](https://roboticgen3d.com/learn/marketplace-custom-print-or-3d-design)
- [Print settings 7 minWhat your 3D print settings actually change](https://roboticgen3d.com/learn/layer-height-infill-material)
- [Pricing 6 minWhat decides the price of a 3D print](https://roboticgen3d.com/learn/3d-printing-cost-sri-lanka)
- [3D design 5 minNo model yet? From idea to 3D design](https://roboticgen3d.com/learn/idea-to-3d-design)

## Ready to make it?

Upload your model for a free quote, shop a ready-made design, or ask us to design the part. We confirm every price with you on WhatsApp.

[Get a free quote](https://roboticgen3d.com/quote) [Shop the marketplace](https://roboticgen3d.com/marketplace)
